Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Functions
Product manual | Version: 2.1.0 27
8PORT IOL-B FLD PN DC 24V 2.0A
Table 24: Overview of Parameterization Tools
Tool Description
Control with PROFINET IO-Controller The PROFINET IO-Controller must be configured to
exchange process data with the 765 modules. The
GSDML file GSDML-Vx.xx-wago-series765-yyyym-
mdd.xml describes the WAGO I/O-System Field mod-
ule. The PROFINET IO-Controller configuration soft-
ware imports this GSDML file, and the user can config-
ure and parameterize one or more 765 modules. The
user loads the configuration onto the PROFINET con-
troller. The PROFINET controller configures and pa-
rameterizes the 765 module via PROFINET.
WAGO Webserver I/O Field WAGO Webserver I/O Field is a Webserver that is in-
tegrated into the 765 module. Using a Web browser,
the user can display the Web pages and display and
modify parameters.
WAGO I/O Field app The WAGO I/O Field app is an app for mobile devices
that can communicate with a 765 module via Blue-
tooth
®
.
Three domains are distinguished for configuration and parameterization:
1. PROFINET configuration: PROFINET modules and submodules
2. Port configuration: digital input or output
3. IO-Link device configuration
The following table shows which tool can influence which domain.
Table 25: Parameterization Overview
Tool PROFINET Modules and
Submodules
Port Configuration IO-Link Device Configu-
ration
PROFINET IO-Controller The PROFINET IO-Con-
troller configures the
PROFINET modules and
submodules of the 765
module.
The IO-Controller sets the
parameter the user selects
on the basis of the param-
eters in the GSDML file.
These parameters config-
ure each individual port
and determine whether the
port is used as a digital in-
put or digital output (or is
disabled).
–
WAGO Webserver I/O
Field
– Yes Input fields to read/write
index; expert knowledge;
the I/O Field Webserver
does not evaluate an
IODD;
WAGO I/O Field app – Yes Yes
IODD can be used by the
app to parameterize an IO-
Link device
WAGO IO-Link Configura-
tor
– Yes Yes
IODD can be used by the
IO-Link configurator to pa-
rameterize an IO-Link de-
vice.