Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000Functions
30 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
• Display information about the connected IO-Link module
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Read and write access to the connected IO-Link devices
• Show process data
Examples of product settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset product to factory settings
• Load firmware onto the module
• Display and set parameters for Bluetooth
®
connection to the module
• Update Bluetooth
®
firmware
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Table 26: Function Overview for WAGO Webserver I/O Field and WAGO IO-Link Modules
Menu Tab Description Section
Dashboard - Display product informa-
tion
Port X01, X02, ... (All) Port information and set-
tings for IO-Link ports X01,
X02 etc.
8Configuring Ports
[}78]
Information Display measured values
of a port and information
on the connected IO-Link
device (temperature, volt-
age, current and state on
pins1, 2 and 4)
Status Display status information
across the entire port
Configuration Make port settings (such
as operating mode or
product check for valida-
tion and backup)
IOL Access to connected IO-
Link devices
Process data Display process data (in-
put/output)
Settings (All) Product settings
Device configuration Configure parameters for
IP connection
8Configuring IP Param-
eters [}82]
Maintenance information Store maintenance infor-
mation
8Storing Maintenance
Information [}82]
Factory reset Resetting the product to
factory settings
8Resetsetting the Mod-
ule to the Factory Set-
tings [}85]
Firmware upgrade Update firmware 8Updating Firmware
[}84]
Bluetooth Access via Bluetooth 8Configure Bluetooth
[}86]