Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000Functions
32 Product manual | Version: 2.1.0
8PORT IOL-B FLD PN DC 24V 2.0A
Note
Read the online help!
You can find Product-specific information on the WAGO I/O Field app in the online help
for the app.
An iOS version of the WAGO I/O Field app is available for free in the Apple App Store,
and an Android version in the Google Play Store.
5.6 Communication Interfaces
The product has the following interfaces and supports the following protocols:
• ETHERNET Interfaces
– PROFINET
– HTTP for WAGO Webserver I/O Field
– TCP for the OPC UA server
– UDP for WAGO IO-Link Configurator
• Bluetooth
®
for the WAGO I/O Field app
5.6.1 PROFINET
The module exchanges the process data with the controller via PROFINET. The process
data communication requires the controller and module to be configured and parameter-
ized.
If a value falls above or below a limiting value, e.g., a temperature limit, the module sends
and alarm to the controller.
5.6.2 OPC UA Server
The product contains an integrated OPC UA server.
Function Overview
• Read product identification
• Read configuration
• Read measured values: current, voltage, temperature
• Events: overcurrent, overload and overtemperature
• Read status information
• Read process data
• Read statistics: minimum/maximum current per pin, minimum/maximum voltage per
pin, minimum/maximum temperature
• User access: anonymous (only read access) or username/password (read and write
access)