Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Table of Contents
Product manual | Version: 2.1.0 v
8PORT IOL-B FLD PN DC 24V 2.0A
9.2 Connect Power Supply.......................................................................................... 57
9.3 Connecting Cables................................................................................................ 60
9.4 Connecting Fieldbus ............................................................................................. 60
9.5 Connecting Sensors/Actuators.............................................................................. 62
10 Commissioning ..............................................................................................................65
10.1 Setting an IP Address ........................................................................................... 65
10.2 Parameterization ................................................................................................... 66
10.2.1 PROFINET ................................................................................................... 66
10.2.1.1 Parameterizing the Product via PROFINET ........................................66
10.2.1.1.1 Selecting the Product................................................................. 67
10.2.1.1.2 Configuring the PROFINET Station Name and IP Address....... 67
10.2.1.1.3 Parameterizing Ports ................................................................. 67
10.2.1.1.4 Parameterizing the Submodule ................................................. 67
10.2.2 WAGO Webserver I/O Field .........................................................................67
10.2.2.1 Opening WAGO Webserver I/O Field..................................................67
10.2.2.2 WAGO Webserver I/O Field User Interface.........................................68
10.2.2.2.1 Maintenance Information ........................................................... 68
10.2.2.2.2 Advanced Module and Port Information .................................... 68
10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field......69
10.2.2.3.1 Displaying Port Information........................................................ 69
10.2.2.3.2 Displaying Measured Values and Information on Connected IO-
Link Devices .............................................................................. 70
10.2.2.3.3 Displaying Port Status Information ............................................ 72
10.2.2.3.4 State .......................................................................................... 72
10.2.2.3.5 Quality........................................................................................ 73
10.2.2.3.6 Revision ID ................................................................................ 73
10.2.2.3.7 Baud Rate.................................................................................. 73
10.2.2.3.8 Cycle Time................................................................................. 73
10.2.2.3.9 Input Data Length ...................................................................... 74
10.2.2.3.10 Output Data Length ................................................................... 74
10.2.2.3.11 Vendor ID................................................................................... 74
10.2.2.3.12 Device ID ................................................................................... 74
10.2.2.3.13 Displaying Process Data............................................................ 74
10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field ..............75
10.2.2.4.1 Accessing a Connected IO-Link Device .................................... 75
10.2.2.4.2 Configuring Ports ....................................................................... 78
10.2.2.4.3 Configuring IP Parameters ........................................................ 82
10.2.2.4.4 Storing Maintenance Information............................................... 82
10.2.2.4.5 Updating Firmware .................................................................... 84
10.2.2.4.6 Resetsetting the Module to the Factory Settings ....................... 85
10.2.2.4.7 Configure Bluetooth ................................................................... 86
10.2.2.4.8 Logging Users on and off and Managing Them......................... 89
10.2.2.4.9 Forcing Digital Inputs and Outputs ............................................ 91
10.2.2.4.10 Forcing IO-Link ports ................................................................. 92
10.2.3 WAGO IO-Link Configurator.........................................................................94
10.2.3.1 System Requirements .........................................................................94
10.2.3.2 Launching WAGO IO-Link Configurator ..............................................94
10.2.3.2.1 Operation as a Standalone Program ......................................... 94
10.2.3.2.2 Activation and Licensing ............................................................ 95
10.2.3.2.3 Install ......................................................................................... 96
10.2.3.3 WAGO IO-Link Configurator User Interface ........................................96
10.2.3.3.1 Start Screen and Login Dialog................................................... 96
10.2.3.3.2 Workbench................................................................................. 97
10.2.3.3.3 Device Catalog .......................................................................... 97
10.2.3.3.4 Topology .................................................................................... 98