Product Manual
Table Of Contents
- Table of Contents
- 1 Provisions
- 2 Safety
- 3 Overview
- 4 Properties
- 5 Functions
- 6 Planning
- 7 Transport and Storage
- 8 Installation and Removal
- 9 Connection
- 10 Commissioning
- 10.1 Setting an IP Address
- 10.2 Parameterization
- 10.2.1 PROFINET
- 10.2.2 WAGO Webserver I/O Field
- 10.2.2.1 Opening WAGO Webserver I/O Field
- 10.2.2.2 WAGO Webserver I/O Field User Interface
- 10.2.2.3 Opening the Product Information via WAGO Webserver I/O Field
- 10.2.2.3.1 Displaying Port Information
- 10.2.2.3.2 Displaying Measured Values and Information on Connected IO-Link Devices
- 10.2.2.3.3 Displaying Port Status Information
- 10.2.2.3.4 State
- 10.2.2.3.5 Quality
- 10.2.2.3.6 Revision ID
- 10.2.2.3.7 Baud Rate
- 10.2.2.3.8 Cycle Time
- 10.2.2.3.9 Input Data Length
- 10.2.2.3.10 Output Data Length
- 10.2.2.3.11 Vendor ID
- 10.2.2.3.12 Device ID
- 10.2.2.3.13 Displaying Process Data
- 10.2.2.4 Parameterizing the Product via WAGO Webserver I/O Field
- 10.2.2.4.1 Accessing a Connected IO-Link Device
- 10.2.2.4.2 Configuring Ports
- 10.2.2.4.3 Configuring IP Parameters
- 10.2.2.4.4 Storing Maintenance Information
- 10.2.2.4.5 Updating Firmware
- 10.2.2.4.6 Resetsetting the Module to the Factory Settings
- 10.2.2.4.7 Configure Bluetooth
- 10.2.2.4.8 Logging Users on and off and Managing Them
- 10.2.2.4.9 Forcing Digital Inputs and Outputs
- 10.2.2.4.10 Forcing IO-Link ports
- 10.2.3 WAGO IO-Link Configurator
- 10.2.3.1 System Requirements
- 10.2.3.2 Launching WAGO IO-Link Configurator
- 10.2.3.3 WAGO IO-Link Configurator User Interface
- 10.2.3.4 Parameterizing the Product with WAGO IO-Link Configurator
- 10.2.4 WAGO I/O Field app
- 10.2.5 OPC UA Server
- 11 Diagnostics
- 12 Service
- 13 Decommissioning
- 14 Appendix
- List of Tables
- List of Figures
765-4102/0100-0000 Commissioning
Product manual | Version: 2.1.0 95
8PORT IOL-B FLD PN DC 24V 2.0A
This normally the controller’s job, and the tool cannot modify the configuration here
concurrently. However, some masters can also be operated on the tool without a PLC.
In this case, the tool can configure the master. For ETHERNET-based WAGO IO-Link
masters, this functionality is usually available if there is no connection to the PLC.
Please refer to the corresponding documentation of the master in this regard.
• Reading the master’s configuration
The configuration is read from the master, compared to the setting in the tool and dis-
played. This function is always available.
10.2.3.2.2 Activation and Licensing
WAGO IO-Link Configurator is protected by Codemeter from WIBU-Systems AG in Karls-
ruhe. No activation or license key is necessary for the standard edition. The professional
edition is initially available for a 30-day trial. After that, a license key is necessary, which
is sent by email in a link.
Example: http://lc.codemeter.com/12686/depot/get.php?id=xxxxx-xxxxx-xxxxx-xxxxx-
xxxxx
Follow this link or copy it into the address bar of your browser. The TMG TE license portal
then opens:
You can now specify whether you want to transfer the license to your computer or a hard-
ware dongle. Please select the corresponding option.