Users Manual
765-1104/0100-0000Functions
28 Product manual | Version: 2.1.0
16DO FLD PN DC 24V 2.0A
• User setup and management, as well as user login and logout
• Reset product to factory settings and restart firmware
• Simulating inputs; forcing outputs
Examples of port information include:
• Display current measured values of the digital inputs and outputs: temperature, volt-
age, current and status on pins 1, 2 and 4
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Show process data
Examples of product settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset product to factory settings
• Load firmware onto the module
• Display and set parameters for Bluetooth
®
connection to the module
• Update Bluetooth
®
firmware
Function overview
The following overview shows the functions offered by WAGO Webserver I/O Field that is
integrated into the product and the menu items/tabs in the user interface that can be used
to address these functions:
Table 24: Function Overview for WAGO Webserver I/O Field for Digital Input/Output Modules
Menu Tab Description Section
Dashboard - Displaying product infor-
mation
Ports X01, X02 etc. (All) Port information and set-
tings for the IO-Link ports
X01, X02, ...
8Configure Ports
[}62]
Information Display current measured
values for the port (tem-
perature, voltage, current
and status on pins1, 2
and 4) and information on
the connected IO-Link de-
vice
Status Displays status information
for the entire port
Configuration Make port settings (such
as operating mode or
product check for valida-
tion and backup)
IOL Access to connected IO-
Link device
Process data Display process data (in-
put/output)