Cut Sheet

Data sheet| Item number:2000-1401
www.wago.com/2000-1401
Subject to changes. Please also observe the further product documentation!
WAGO Corporation
Germantown, WI 53022
Phone: 1-800-DIN-RAIL (346-7245) | Fax: [phone]
Email: [e-mail] | Web: www.wago.us
Do you have any questions about our products?
We are always happy to take your call at [phone] or 1 800-DIN-
RAIL.
17.05.2021Page /17 17
A separator plate is located between the Ex
e II and Ex i terminal strip.
End plate
ExeII terminal blocks
Separator plate for Exe/Exi applications
End plate
Exi terminal blocks
According to EN 50020, a minimum distance
of 50 mm must be kept between live parts of
Ex e and Ex i circuits. The use of Ex e/Ex i
separators is a space-saving solution when
Ex e and Ex i terminal blocks are mounted on
a common DIN-rail.
ExeII/Exi terminal strip
Note:
The movable feet of terminal blocks and
separator plates must face the same
direction.
Separator plate for Exe/Exi applications
An end plate must be applied to the terminal
block located directly behind an Exe/Exi
separator plate.
Product family
TOPJOB® S
TOPJOB®S: In various industrial applications and modern building installations, WAGO's wide and versatile range of rail-
mount terminal blocks provides more than just reliable electrical connections.
Show all products from the family