Manualshelf

Datasheet

ManualsBrandsWago ManualsConnectorsSMD Through-Board Terminal Block, 0.75mm², 1 Poles
1234
Data sheet | Item number:2070-451/998-606
www.wago.com/2070-451/998-606
10.05.2019Page /2 4
SMD PCB terminal block with Push-in CAGE CLAMP connection for back-side wiring of LED modules
®
Low profile of just 1.1 mm on the module’s front side
Connect solid conductors via push-in termination
Insert fine-stranded conductors and remove all conductors via operating tool
Data
Electrical data
Ratings per IEC/EN 60664-1
Ratings note Electrical Data for FR4 PCB Type
Rated voltage (III / 3) 320 V
Rated impulse voltage (III / 3) 4 kV
Rated voltage (III / 2) 320 V
Rated impulse voltage (III / 2) 4 kV
Rated voltage (II / 2) 630 V
Rated impulse voltage (II / 2) 4 kV
Rated current 9 A
Ratings according to 2 IEC/EN 60664-1
Ratings note 2 Electrical Data for Metal-Core PCBs
Rated voltage (III / 3) 2 200 V
Rated impulse voltage (III / 3) 2 4 kV
Rated voltage (III / 2) 2 320 V
Rated impulse voltage (III / 2) 2 4 kV
Rated voltage (II / 2) 2 500 V
Rated impulse voltage (II / 2) 2 4 kV
Rated current (2) 9 A
Approvals per UL 1977
Rated voltage per UL 1977 (factory wiring only) 600 V
Rated current per UL 1977 (factory wiring only) 9 A
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Operating tool
Solid conductor 0.2 … 0.75mm²/ 24 … 18AWG
Fine-stranded conductor 0.2 … 0.75mm²/ 24 … 18AWG
Strip length 8 … 10mm/ 0.31 … 0.39inch
Conductor entry angle to the PCB 0 °
No. of poles 1