Certifications

File E69654

Project 10CA52024

July 06, 2011

REPORT

WIRE CONNECTORS AND SOLDERING LUGS

Wago Kontakttechnik Gmbh & Co Kg

Minden, Germany

Underwriters Laboratories Inc. authorizes the above-named company to

reproduce this Report provided it is reproduced in its entirety.

Created b

UL Document Assembler 2019-05-02 23:59:44 -05:00

PAGE 1
File E69654 Project 10CA52024 July 06, 2011 REPORT On WIRE CONNECTORS AND SOLDERING LUGS Wago Kontakttechnik Gmbh & Co Kg Minden, Germany Copyright © 2011 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety.
PAGE 2
File E69654 Vol. 1 Sec. 5 and Report Page 1 Issued: Revised: 2011-07-06 2019-04-25 DESCRIPTION PRODUCT COVERED: USL, CNL Listed Splicing Wire Connectors, Cat. No. 2273 followed by -202, -203, -204, -205, or -208. GENERAL CHARACTER AND USE: The devices described in this Report are of the following type. Type of Wiring Termination - Spring action. The insulating cover described in this Report are molded from a Recognized Component plastic (QMFZ2), in two pieces.
PAGE 3
File E69654 Vol. 1 Sec. 5 and Report Page 2 Issued: 2011-07-06 NOMENCLATURE: 2273 A -202 B A. Basic Type – Series 2273 B. No. Of Wire Entry Holes (Insulation Color)2 3 4 5 8 – – - Holes Holes Holes Holes Holes (Gray) (Orange) (Red) (Yellow) (White) ENGINEERING CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE USE): General – Products designated USL have been investigated using requirements contained in the Standard for Splicing Wire Connectors UL 486C, Fifth Edition.