Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSpring-loaded terminal 0.50 mm² Number of pins 10 PCB T.STR. 10 POL. 2,54 MM ORANGE Orange 180 pc(s)

Data sheet from 09.11.2012

Item no.: 233-510

Product description: PCB terminal strip 2 solder pins/pole 10-pole Pin spacing 2.54

mm / 0.1 in with push-button

Produkt kann von Bild abweichen / product may differ

Packing unit 180 4*45 pieces

RoHS compliant

Product group 4 (Printed Circuit)

Weight 3.99 g

Color orange

No. of connection Points 10

No. of potentials 10

pole count 10

Height 15.5 mm

Height 0.61 in

Width 27.7 mm

Width 1.091 in

Depth 13.9 mm

Depth 0.547 in

Pin spacing from 2.54 mm

Pin spacing from 0.1 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

Measured voltage EN 160 V

Measured shock voltage 2.5 kV

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 233-510 Product description: PCB terminal strip 2 solder pins/pole 10-pole Pin spacing 2.54 mm / 0.1 in with push-button Produkt kann von Bild abweichen / product may differ Packing unit 180 4*45 pieces RoHS compliant Product group 4 (Printed Circuit) Weight 3.99 g Color orange No. of connection Points 10 No. of potentials 10 pole count 10 Height 15.5 mm Height 0.61 in Width 27.7 mm Width 1.091 in Depth 13.9 mm Depth 0.
PAGE 2
Current intensity EN 6A Overvoltage category EN II II Pollution degree 2 2 von 5
PAGE 3
Data sheet from 09.11.2012 Measured voltage EN 320 V Measured shock voltage 2.5 kV Current intensity EN 6A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 63 V Rated surge voltage 2.5 kV Nominal current 6A Connection method CAGE CLAMP®CONNECTION Cross section [mm²] 0.08 - 0.5 mm² Wiring method solid Cross section [mm²] 0.08 - 0.5 mm² Wiring method fine-stranded Cross section [mm²] 0 - 0.
PAGE 4
Data sheet from 09.11.2012 Conductor entry angle to the PCB (degrees) 30 ° Solder pin length [mm] 4 mm Solder pin width A [mm] 0.5 mm Solder pin width B [mm] 0.75 mm Diameter of drilled hole [mm] 1.1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 233-510 ABS 04-HG469925/1-PDA 250 4 0,08-0,5 233-510 BV 11915/A0 250 6 0,08-0,5 233-510 CSA 154112-1465035 150 4 28-20 233-510 DNV E-9215 250 4 0,08-0,5 233-510 GL 17296-00HH 250 4 0,08-0,5 233-510 KEMA 90.6212.