Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSpring-loaded terminal 0.50 mm² Number of pins 2 PCB TERM.STR. 2 POL. W. LEVER Orange 600 pc(s)

Data sheet from 09.11.2012

Item no.: 234-502

Product description: PCB terminal strip 2 solder pins/pole 2-pole Pin spacing 2.54

mm / 0.1 in with push-button

Produkt kann von Bild abweichen / product may differ

Packing unit 600 6*100 pieces

RoHS compliant

Product group 4 (Printed Circuit)

Weight 1.06 g

Color orange

No. of connection Points 2

No. of potentials 2

pole count 2

Height 14 mm

Height 0.551 in

Width 7.28 mm

Width 0.287 in

Depth 14.4 mm

Depth 0.567 in

Pin spacing from 2.54 mm

Pin spacing from 0.1 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

Measured voltage EN 160 V

Measured shock voltage 2.5 kV

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 234-502 Product description: PCB terminal strip 2 solder pins/pole 2-pole Pin spacing 2.54 mm / 0.1 in with push-button Produkt kann von Bild abweichen / product may differ Packing unit 600 6*100 pieces RoHS compliant Product group 4 (Printed Circuit) Weight 1.06 g Color orange No. of connection Points 2 No. of potentials 2 pole count 2 Height 14 mm Height 0.551 in Width 7.28 mm Width 0.287 in Depth 14.4 mm Depth 0.
PAGE 2
Current intensity EN 6A Overvoltage category EN II II Pollution degree 2 2 von 5
PAGE 3
Data sheet from 09.11.2012 Measured voltage EN 320 V Measured shock voltage 2.5 kV Current intensity EN 6A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 63 V Rated surge voltage 2.5 kV Nominal current 6A Connection method CAGE CLAMP®CONNECTION Cross section [mm²] 0.08 - 0.5 mm² Wiring method solid Cross section [mm²] 0.08 - 0.5 mm² Wiring method fine-stranded Cross section to [mm²] 0.
PAGE 4
Data sheet from 09.11.2012 Conductor entry angle to the PCB (degrees) 90 ° Solder pin length [mm] 4 mm Solder pin width A [mm] 0.5 mm Solder pin width B [mm] 0.75 mm Diameter of drilled hole [mm] 1.1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 234-502 ABS 04-HG469925/1-PDA 250 4 0,08-0,5 234-502 BV 11915/A0 250 6 0,08-0,5 234-502 CSA 154112-1465035 150 4 28-20 234-502 DNV E-9215 250 4 0,08-0,5 234-502 GL 17296-00HH 250 4 0,08-0,5 234-502 KEMA 90.6212.