Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSpring-loaded terminal 0.50 mm² Number of pins 12 PCB TERM.STR. 12 POL. W. LEVER Orange 140 pc(s)

Data sheet from 09.11.2012

Item no.: 234-512

Product description: PCB terminal strip 2 solder pins/pole 12-pole Pin spacing 2.54

mm / 0.1 in with push-button

Produkt kann von Bild abweichen / product may differ

Packing unit 140 4*35 pieces

RoHS compliant

Product group 4 (Printed Circuit)

Weight 5.69 g

Color orange

No. of connection Points 12

No. of potentials 12

pole count 12

Height 14 mm

Height 0.551 in

Width 32.68 mm

Width 1.287 in

Depth 14.4 mm

Depth 0.567 in

Pin spacing from 2.54 mm

Pin spacing from 0.1 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

Measured voltage EN 160 V

Measured shock voltage 2.5 kV

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 234-512 Product description: PCB terminal strip 2 solder pins/pole 12-pole Pin spacing 2.54 mm / 0.1 in with push-button Produkt kann von Bild abweichen / product may differ Packing unit 140 4*35 pieces RoHS compliant Product group 4 (Printed Circuit) Weight 5.69 g Color orange No. of connection Points 12 No. of potentials 12 pole count 12 Height 14 mm Height 0.551 in Width 32.68 mm Width 1.287 in Depth 14.4 mm Depth 0.
PAGE 2
Current intensity EN 6A Overvoltage category EN II II Pollution degree 2 2 von 5
PAGE 3
Data sheet from 09.11.2012 Measured voltage EN 320 V Measured shock voltage 2.5 kV Current intensity EN 6A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 63 V Rated surge voltage 2.5 kV Nominal current 6A Connection method CAGE CLAMP®CONNECTION Cross section [mm²] 0.08 - 0.5 mm² Wiring method solid Cross section [mm²] 0.08 - 0.5 mm² Wiring method fine-stranded Cross section to [mm²] 0.
PAGE 4
Data sheet from 09.11.2012 Conductor entry angle to the PCB (degrees) 90 ° Solder pin length [mm] 4 mm Solder pin width A [mm] 0.5 mm Solder pin width B [mm] 0.75 mm Diameter of drilled hole [mm] 1.1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 234-512 ABS 04-HG469925/1-PDA 250 4 0,08-0,5 234-512 BV 11915/A0 250 6 0,08-0,5 234-512 CSA 154112-1465035 150 4 28-20 234-512 DNV E-9215 250 4 0,08-0,5 234-512 GL 17296-00HH 250 4 0,08-0,5 234-512 KEMA 90.6212.