Data Sheet
Data sheet | Item number:235-401/332-000
www.wago.com/235-401/332-000
06.12.2018Page /2 7
Set to metric or inch pin spacing by compressing terminal strips or pulling them apart
Other colorsOther variants can be requested via the WAGO sales department or, if necessary, configured at https://configurator.wago.com/:
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 250 V
Rated impulse voltage (III / 3) 4 kV
Rated voltage (III / 2) 250 V
Rated impulse voltage (III / 2) 4 kV
Rated voltage (II / 2) 400 V
Rated impulse voltage (II / 2) 4 kV
Rated current 10 A
Legend (ratings) (III / 2) ≙ Overvoltage category III / Pollution degree 2
Approvals per UL 1059
Rated voltage UL (Use Group B) 300 V
Rated current UL (Use Group B) 10 A
Rated voltage UL (Use Group D) 300 V
Rated current UL (Use Group D) 10 A
Approvals per CSA
Rated voltage CSA (Use Group B) 300 V
Rated current CSA (Use Group B) 15 A
Connection data
Connection technology
Push-in CAGE CLAMP
®
Actuation type Push-button
Solid conductor 0.2 … 1.5 mm² / 20 … 14 AWG
Fine-stranded conductor 0.75 … 1.5 mm² / 20 … 14 AWG
Fine-stranded conductor with ferrule with plastic collar 0.25 … 1 mm²
Fine-stranded conductor with ferrule without plastic collar 0.25 … 1 mm²
Strip length 9 … 10 mm / 0.35 … 0.39 Inch
Conductor entry angle to the PCB 0 °
No. of poles 1
Total number of connection points 1
Total number of potentials 1
Number of connection types 1