Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSpring-loaded terminal 1.50 mm² Number of pins 3 PCB TERM.STRIP W/PUSH BUTT.GREY 3-P Grey 400 pc(s)

Data sheet from 09.11.2012

Item no.: 250-103

Product description: 1-conductor PCB terminal strip 1 front solder pin/pole 3-pole

Pin spacing 3.5 mm / 0.138 in with push-button with test port for

1.3 mm Ø test pin

Produkt kann von Bild abweichen / product may differ

Packing unit 400 4*100 pieces

RoHS compliant

Product group 4 (Printed Circuit)

Weight 1.52 g

Color grey

No. of connection Points 3

No. of potentials 3

pole count 3

Height 13.1 mm

Height 0.516 in

Width 12 mm

Width 0.472 in

Depth 12 mm

Depth 0.472 in

Pin spacing from 3.5 mm

Pin spacing from 0.138 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

Measured voltage EN 160 V

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 250-103 Product description: 1-conductor PCB terminal strip 1 front solder pin/pole 3-pole Pin spacing 3.5 mm / 0.138 in with push-button with test port for 1.3 mm Ø test pin Produkt kann von Bild abweichen / product may differ Packing unit 400 4*100 pieces RoHS compliant Product group 4 (Printed Circuit) Weight 1.52 g Color grey No. of connection Points 3 No. of potentials 3 pole count 3 Height 13.1 mm Height 0.516 in Width 12 mm Width 0.
PAGE 2
Measured shock voltage 2.
PAGE 3
Data sheet from 09.11.2012 Measured voltage EN 320 V Measured shock voltage 2.5 kV Current intensity EN 8A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 160 V Rated surge voltage 2.5 kV Nominal current 8A Cross section [mm²] 0.2 - 1.5 mm² Wiring method solid Cross section [mm²] 0.2 - 1.5 mm² Wiring method fine-stranded Cross section [mm²] 0.25 - 1 mm² Wiring method fine-stranded (with ferrule and plastic collar) Cross section [mm²] 0.
PAGE 4
Data sheet from 09.11.2012 Solder pin length [mm] 3.6 mm Solder pin width A [mm] 0.4 mm Solder pin width B [mm] 0.75 mm Diameter of drilled hole [mm] 1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 250-103 ABS 04-HG469925/1-PDA 250 2 0,5-1,5 250-103 BV 11915/A0 200 2 0,5-1,5 250-103 CCA NL6336 250 8 0,2-1,5 250-103 CSA 154112-1132097 300 10 20-16 250-103 DNV E-9215 250 2 0,5-1,5 250-103 GL 17296-00HH 250 2 0,5-1,5 250-103 KEMA 2114919.