Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsConductor board terminal series 250 CAGE CLAMP® S 2 A

Data sheet from 09.11.2012

Item no.: 250-412

Product description: 1-conductor PCB terminal strip 1 solder pin/pole, staggered 12-

pole Pin spacing 2.5 mm / 0.098 in with push-button with test

port for 1.3 mm Ø test pin

Produkt kann von Bild abweichen / product may differ

Packing unit 1 piece

RoHS compliant

Product group 4 (Printed Circuit)

Weight 4.304 g

Color grey

No. of connection Points 12

No. of potentials 12

pole count 12

Height 13.1 mm

Height 0.516 in

Width 31.5 mm

Width 1.24 in

Depth 12 mm

Depth 0.472 in

Pin spacing from 2.5 mm

Pin spacing from 0.098 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

Measured voltage EN 160 V

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 250-412 Product description: 1-conductor PCB terminal strip 1 solder pin/pole, staggered 12pole Pin spacing 2.5 mm / 0.098 in with push-button with test port for 1.3 mm Ø test pin Produkt kann von Bild abweichen / product may differ Packing unit 1 piece RoHS compliant Product group 4 (Printed Circuit) Weight 4.304 g Color grey No. of connection Points 12 No. of potentials 12 pole count 12 Height 13.1 mm Height 0.516 in Width 31.5 mm Width 1.
PAGE 2
Measured shock voltage 2.
PAGE 3
Data sheet from 09.11.2012 Measured voltage EN 320 V Measured shock voltage 2.5 kV Current intensity EN 4A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 160 V Rated surge voltage 2.5 kV Nominal current 4A Diameter from 0.4 mm Diameter to 0.8 mm Cross section [mm²] 0.14 - 0.5 mm² Wiring method solid Cross section [mm²] 0.2 - 0.5 mm² Wiring method fine-stranded Cross section to [mm²] 0.
PAGE 4
Data sheet from 09.11.2012 Strip length up to [inch] 0.36 in Conductor entry angle to the PCB (degrees) 45 ° Solder pin length [mm] 3.6 mm Solder pin width A [mm] 0.4 mm Solder pin width B [mm] 0.75 mm Diameter of drilled hole [mm] 1.1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 250-412 CCA NL6336 250 6 0,2-1,5 250-412 CSA 154112-1132097 300 2 24-22 250-412 KEMA 2114919.01 250 6 0,2-1,5 250-412 RMR 11130002 250 2 0,4-0,08 250-412 UR E45172 300 5 26-20 Sorting criteria: admission office - approval number © WAGO Kontakttechnik GmbH & Co.