Datasheet

ManualsBrandsWAGO ManualsPCB Connectors2-tier terminal 1.00 mm² Number of pins 24 DOUBLE DECK TERMINAL STRIP 12 P 5MM Grey 48 pc(s)

Data sheet from 09.11.2012

Item no.: 250-712

Product description: Double-deck PCB terminal strip 2 solder pins/pole, in line 12x2-

pole Pin spacing 5 mm / 0.197 in with push-button with test port

for 2.3 mm Ø test pin

Produkt kann von Bild abweichen / product may differ

Packing unit 36 4*9 pieces

RoHS compliant

Weight 22.932 g

Color grey

No. of connection Points 24

No. of potentials 24

pole count 12

Height 20.9 mm

Height 0.823 in

Width 61.2 mm

Width 2.409 in

Depth 21.7 mm

Depth 0.854 in

Pin spacing from 5 mm

Pin spacing from 0.197 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

Measured voltage EN 320 V

Measured shock voltage 4 kV

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 250-712 Product description: Double-deck PCB terminal strip 2 solder pins/pole, in line 12x2pole Pin spacing 5 mm / 0.197 in with push-button with test port for 2.3 mm Ø test pin Produkt kann von Bild abweichen / product may differ Packing unit 36 4*9 pieces RoHS compliant Weight 22.932 g Color grey No. of connection Points 24 No. of potentials 24 pole count 12 Height 20.9 mm Height 0.823 in Width 61.2 mm Width 2.409 in Depth 21.7 mm Depth 0.
PAGE 2
Current intensity EN 10 A Overvoltage category EN II II Pollution degree 2 Measured voltage EN 630 V 2 von 5
PAGE 3
Data sheet from 09.11.2012 Measured shock voltage 4 kV Current intensity EN 10 A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 320 V Rated surge voltage 4 kV Nominal current 10 A Cross section [mm²] 0.5 - 1.5 mm² Wiring method solid Cross section [mm²] 0.75 - 1.5 mm² Wiring method fine-stranded Cross section [mm²] 0.5 - 1 mm² Wiring method fine-stranded (with ferrule and plastic collar) Cross section [mm²] 0.
PAGE 4
Data sheet from 09.11.2012 Solder pin width A [mm] 0.5 mm Solder pin width B [mm] 0.75 mm Diameter of drilled hole [mm] 1.2 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 250-712 ABS 04-HG469925/1-PDA 450 10 0,5-1,5 250-712 CCA NL6336 400 10 0,2-1,5 250-712 CSA 154112-1132097 300 10 22-14 250-712 GL 17296-00HH 450 10 0,5-1,5 250-712 KEMA 2114919.