Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSpring-loaded terminal 2.50 mm² Number of pins 4 PCB TERM.STRIP 4-POL. 5/5,08 SQMM Grey 200 pc(s)

Data sheet from 09.11.2012

Item no.: 256-404

Product description: PCB terminal strip 2 solder pins/pole 4-pole Pin spacing 5/5.08

mm / 0.2 in

Produkt kann von Bild abweichen / product may differ

Packing unit 200 4*50 pieces

RoHS compliant

Product group 4 (Printed Circuit)

Weight 3.92 g

Color grey

No. of connection Points 4

No. of potentials 4

pole count 4

Height 18.2 mm

Height 0.72 in

Width 22.9 mm

Width 0.902 in

Depth 17.6 mm

Depth 0.693 in

Pin spacing from 5 mm

Pin spacing up to 5.08 mm

Pin spacing from 0.197 in

Pin spacing up to 0.2 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 256-404 Product description: PCB terminal strip 2 solder pins/pole 4-pole Pin spacing 5/5.08 mm / 0.2 in Produkt kann von Bild abweichen / product may differ Packing unit 200 4*50 pieces RoHS compliant Product group 4 (Printed Circuit) Weight 3.92 g Color grey No. of connection Points 4 No. of potentials 4 pole count 4 Height 18.2 mm Height 0.72 in Width 22.9 mm Width 0.902 in Depth 17.6 mm Depth 0.
PAGE 2
Measured voltage EN 320 V Measured shock voltage 4 kV Current intensity EN 24 A 2 von 5
PAGE 3
Data sheet from 09.11.2012 Overvoltage category EN II II Pollution degree 2 Measured voltage EN 630 V Measured shock voltage 4 kV Current intensity EN 24 A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 250 V Rated surge voltage 4 kV Nominal current 24 A Connection method CAGE CLAMP®CONNECTION Cross section [mm²] 0.08 - 2.5 mm² Wiring method solid Cross section [mm²] 0.08 - 2.5 mm² Wiring method fine-stranded Cross section [mm²] 0.25 - 1.
PAGE 4
Data sheet from 09.11.2012 Strip length from [inch] 0.2 in Strip length up to [inch] 0.24 in Conductor entry angle to the PCB (degrees) 45 ° Solder pin length [mm] 4 mm Solder pin width A [mm] 0.7 mm Solder pin width B [mm] 0.7 mm Diameter of drilled hole [mm] 1.1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 256-404 ABS 04-HG469925/1-PDA 500/250 16 0,5-2,5 256-404 BV 11915/A0 500/250 16 0,08-2,5 256-404 CCA NL6249 250 24 0,08-2,5 256-404 CSA 18677-45 300 15 28-12 256-404 DNV E-9215 500/250 16 0,08-2,5 256-404 GL 17296-00HH 500/250 16 0,5-2,5 256-404 KEMA 2110204.