Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSpring-loaded terminal 2.50 mm² Number of pins 12 PCB TERM.STRIP 12-POL. 5/5,08 SQMM Grey 60 pc(s)

Data sheet from 09.11.2012

Item no.: 256-412

Product description: PCB terminal strip 2 solder pins/pole 12-pole Pin spacing

5/5.08 mm / 0.2 in

Produkt kann von Bild abweichen / product may differ

Packing unit 60 4*15 pieces

RoHS compliant

Product group 4 (Printed Circuit)

Weight 11.4 g

Color grey

No. of connection Points 12

No. of potentials 12

pole count 12

Height 18.2 mm

Height 0.72 in

Width 62.9 mm

Width 2.476 in

Depth 17.6 mm

Depth 0.693 in

Pin spacing from 5 mm

Pin spacing up to 5.08 mm

Pin spacing from 0.197 in

Pin spacing up to 0.2 in

Rating based on IEC/EN 60664-1

Overvoltage category EN I III

Pollution degree 2

1 von 5

Summary of content (5 pages)

PAGE 1
Data sheet from 09.11.2012 Item no.: 256-412 Product description: PCB terminal strip 2 solder pins/pole 12-pole Pin spacing 5/5.08 mm / 0.2 in Produkt kann von Bild abweichen / product may differ Packing unit 60 4*15 pieces RoHS compliant Product group 4 (Printed Circuit) Weight 11.4 g Color grey No. of connection Points 12 No. of potentials 12 pole count 12 Height 18.2 mm Height 0.72 in Width 62.9 mm Width 2.476 in Depth 17.6 mm Depth 0.
PAGE 2
Measured voltage EN 320 V Measured shock voltage 4 kV Current intensity EN 24 A 2 von 5
PAGE 3
Data sheet from 09.11.2012 Overvoltage category EN II II Pollution degree 2 Measured voltage EN 630 V Measured shock voltage 4 kV Current intensity EN 24 A Overvoltage category EN III III Degree of pollution 3 Rated voltage EN 250 V Rated surge voltage 4 kV Nominal current 24 A Connection method CAGE CLAMP®CONNECTION Cross section [mm²] 0.08 - 2.5 mm² Wiring method solid Cross section [mm²] 0.08 - 2.5 mm² Wiring method fine-stranded Cross section [mm²] 0.25 - 1.
PAGE 4
Data sheet from 09.11.2012 Strip length from [inch] 0.2 in Strip length up to [inch] 0.24 in Conductor entry angle to the PCB (degrees) 45 ° Solder pin length [mm] 4 mm Solder pin width A [mm] 0.7 mm Solder pin width B [mm] 0.7 mm Diameter of drilled hole [mm] 1.1 mm Tolerance of drilled hole diameter [mm] 0.1 mm Material group I Insulating material PA 6.
PAGE 5
Data sheet from 09.11.2012 Item number Admission office Approval no. Voltage [V] Current [A] Cross section [ mm² ] 256-412 ABS 04-HG469925/1-PDA 500/250 16 0,5-2,5 256-412 BV 11915/A0 500/250 16 0,08-2,5 256-412 CCA NL6249 250 24 0,08-2,5 256-412 CSA 18677-45 300 15 28-12 256-412 DNV E-9215 500/250 16 0,08-2,5 256-412 GL 17296-00HH 500/250 16 0,5-2,5 256-412 KEMA 2110204.