Data sheet | Item number: 280-107 2-conductor ground terminal block; 2.5 mm²; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP®; 2,50 mm²; green-yellow www.wago.com/280-107 Color: Item description Subject to changes. Please also observe the further product documentation! WAGO Corporation Germantown, WI 53022 Phone: 1-800-DIN-RAIL (346-7245) | Fax: (262) 255-6222 Email: info.us@wago.com | Web: www.wago.
Data sheet | Item number: 280-107 www.wago.com/280-107 Item description Note: Terminating Aluminum Conductors WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination. “Alu-Plus” Contact Paste Advantages: Automatically destroys the oxide film during clamping. Prevents fresh oxidation at the clamping point. Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
Data sheet | Item number: 280-107 www.wago.com/280-107 Number of levels 1 Wiring type Side-entry wiring Physical data Width 5 mm / 0.197 inch Height 45 mm / 1.772 inch Depth from upper edge of DIN-rail 30.5 mm / 1.201 inch Mechanical data Design horizontal type Mounting type DIN-35 rail Marking level Side marking Material data Color green-yellow Insulation material Polyamide (PA66) Weight 8.
Data sheet | Item number: 280-107 www.wago.com/280-107 PDA BV Bureau Veritas S.A. EN 60947 07436/F0 BV DNV GL Det Norske Veritas, Germanischer Lloyd - TAE00001V2 LR Lloyds Register EN 60947 91/20112 (E9) UL-Approvals Logo Approval Additional Approval Text UL UL International Germany GmbH UL 1059 Certificate name 20190731E45172 Required accessories End plate Item no.: 280-301 End and intermediate plate; 2.5 mm thick; gray www.wago.com/280-301 Item no.
Data sheet | Item number: 280-107 www.wago.com/280-107 Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; similar to EN 60715; silver-colored Item no.: 210-115 Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 18 mm; www.wago.com/210-115 silver-colored Item no.: 210-118 Steel carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715; silver-colored www.wago.com/210-118 Item no.: 210-196 www.wago.
Data sheet | Item number: 280-107 www.wago.com/280-107 Item no.: 280-322 Separator plate; 2 mm thick; oversized; orange www.wago.com/280-322 Item no.: 280-332 Separator plate; 2 mm thick; oversized; gray www.wago.com/280-332 Marking accessories Item no.: 2009-115 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white www.wago.com/2009-115 Item no.: 2009-115/000-002 WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.
Data sheet | Item number: 280-107 www.wago.com/280-107 Item no.: 793-501/000-002 WMB marking card; as card; not stretchable; plain; snap-on type; yellow www.wago.com/793-501 /000-002 Item no.: 793-501/000-005 WMB marking card; as card; not stretchable; plain; snap-on type; red www.wago.com/793-501 /000-005 Item no.: 793-501/000-006 WMB marking card; as card; not stretchable; plain; snap-on type; blue www.wago.com/793-501 /000-006 Item no.
Data sheet | Item number: 280-107 www.wago.com/280-107 type; orange Item no.: 793-5501/000-017 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-017 type; green Item no.: 793-5501/000-023 www.wago.com/793-5501 WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on /000-023 type; light green Item no.: 793-5501/000-024 www.wago.
Data sheet | Item number: 280-107 www.wago.com/280-107 Jumper Item no.: 210-103 Wire commoning chain; insulated; black www.wago.com/210-103 Item no.: 210-123 Wire commoning chain; insulated; blue www.wago.com/210-123 Item no.: 280-402 Jumper; insulated; gray www.wago.com/280-402 Item no.: 280-409 Jumper; insulated; gray www.wago.com/280-409 Item no.: 280-422 Jumper; insulated; yellow-green www.wago.com/280-422 Item no.: 709-110 Wire commoning chain; 2.5 mm²; insulated; black www.wago.
Data sheet | Item number: 280-107 www.wago.com/280-107 Item no.: 210-720 Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured www.wago.com/210-720 Protective Warning Marker Item no.: 280-405 Protective warning marker; with high-voltage symbol, black; for 5 terminal blocks; yellow www.wago.com/280-405 Downloads Documentation Bid Text 280-107 Feb 19, 2019 xml 3.2 kB Download May 31, 2017 doc 24.6 kB Download Apr 3, 2019 pdf 2.
Data sheet | Item number: 280-107 www.wago.com/280-107 Installation Notes Snapping a terminal block onto the DIN-rail. Removing a terminal block from the DIN-rail. Ground conductor terminal blocks snap onto the rail in the same way as through terminal blocks, but automatically make a direct electrical connection to the rail. When mounting on the DIN-35 rail, ensure that open sides of terminal blocks face in the same direction. After mounting, sliding the blocks on the rail is not possible.
Data sheet | Item number: 280-107 www.wago.com/280-107 CAGE CLAMP® connection Inserting a conductor. With ferruled conductors, it is necessary to use a terminal block one size larger than the conductor's nominal cross-section. Push jumper down until fully inserted. Commoning ground conductor terminal blocks with through terminal blocks is possible in one direction only (via rear side of terminal block) using adjacent jumpers.
Data sheet | Item number: 280-107 www.wago.com/280-107 When operating the handles beyond the locked position, the ratchet allows the tool to open and be removed from the terminal block. Labeling via WMB Multi Marking System. Subject to changes. Please also observe the further product documentation! WAGO Corporation Germantown, WI 53022 Phone: 1-800-DIN-RAIL (346-7245) | Fax: (262) 255-6222 Email: info.us@wago.com | Web: www.wago.