Cut Sheet

Data sheet| Item number:280-541
www.wago.com/280-541
Subject to changes. Please also observe the further product documentation!
WAGO Corporation
Germantown, WI 53022
Phone: 1-800-DIN-RAIL (346-7245) | Fax: [phone]
Email: [e-mail] | Web: www.wago.us
Do you have any questions about our products?
We are always happy to take your call at [phone] or 1 800-DIN-
RAIL.
19.05.2021Page /2 12
It is also possible to apply WAGO “Alu-Plus” on the whole surface of the aluminum conductor before termination.additionally
Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors::
2.5mm² = 16A
4mm² = 22A
Data
Electrical data
IEC Approvals
Ratings per IEC/EN 60947-7-1
Rated voltage (III / 3) 500 V
Rated surge voltage (III/3) 6 kV
Rated current 20 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Connection data
Connection technology
CAGE CLAMP
®
Actuation type Operating tool
Connectable conductor materials Copper
Solid conductor 0.08 … 2.5mm²/ 28 … 12AWG
Fine-stranded conductor 0.08 … 2.5mm²/ 28 … 12AWG
Note (conductor cross-section) 12 AWG: THHN, THWN
Strip length 8 … 9mm/ 0.31 … 0.35inch
Total number of connection points 2
Total number of potentials 2
Number of levels 2
Wiring type Front-entry wiring
Physical data
Width 5mm/ 0.197inch
Height 64mm/ 2.52inch
Depth from upper edge of DIN-rail 70.5mm/ 2.776inch
Mechanical data
Design horizontal type
Mounting type DIN-35 rail
Marking level Center marking