Data Sheet

Data sheet | Item number:288-320
www.wago.com/288-320
06.12.2018Page /2 4
Nominal input current at U
N
21.8 mA
Load circuit:
Number of make contacts/switch on contacts 1
Contact material (relay) AgSnO
2
Limiting continuous current 16 A
Max. make current (resistive) ; 4 s 25 A (AC)
Max. switching voltage 250 VAC
Max. switching power (resistive) 4000 VAAC; DC see load limit curve
Recommended minimum load 12 V / 100 mA
Pull-in time (typ.) 8 ms
Drop-out time (typ.) 2 ms
Bounce time (typ) 2 ms
Mechanical life (N.O.; resistive load; 23 °C)
30 x 10 switching operations
6
Safety and protection:
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 2
Dielectric strength, control/load circuit (AC, 1 min) 4 kV
rms
Dielectric strength, control/load circuit (AC, 1 min) 4 kV
rms
Dielectric strength open contact (AC, 1 min) 1 kV
rms
Dielectric strength open contact (AC, 1 min) 1 kV
rms
Connection data
Connection technology
CAGE CLAMP
®
WAGO terminal WAGO 236 Series
Solid conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Fine-stranded conductor 0.08 … 2.5 mm² / 28 … 12 AWG
Strip length 5 … 6 mm / 0.2 … 0.24 Inch
Geometrical Data
Width 20.5 mm / 0.807 inch
Height from upper-edge of DIN-35 rail 47 mm / 1.85 inch
Depth 85 mm / 3.346 inch