Data Sheet

Data sheet | Item number:289-436
Interface Module; with male connector, type F; 48-pole; for connectors per
DIN 41612; Vertical mounting; Harting mating connector; with and without
strain relief for mating F-type connectors; per DIN; without strain relief
www.wago.com/289-436
06.12.2018Page /1 3
Similiar to picture
Data
Electrical data
Operating voltage ≤ 30 VAC; ≤ 50 VDC
Nominal current 4 A
Contact resistance (max.) 16 mΩ
Safety and protection:
Rated voltage 50 V
Rated impulse voltage 1.5 kV
Pollution degree 2
Degree of protection IP00*
Note on Protection Type * Notice!Live conductors! Protection against direct contact must be
provided by the equipment builder, e.g., using a WAGO 709 Series
cover (see Accessories) or a similar cover. The installation
requirements for the particular application must be observed.
Connection data

Summary of content (3 pages)