Datasheet

Data sheet | Item number:733-368

THT male header; 0.8 x 0.8 mm solder pin; angled; 100% protected against

mismating; Pin spacing 2.5 mm; 8-pole

www.wago.com/733-368

10.05.2019Page /1 4

L = (Polzahl + 1) x Rastermaß

Color:

Item description

Horizontal or vertical PCB mounting via straight or angled solder pins

100% protected against mismating; only mating halves with the same number of poles can be connected together

PAGE 1
Data sheet | Item number: 733-368 THT male header; 0.8 x 0.8 mm solder pin; angled; 100% protected against mismating; Pin spacing 2.5 mm; 8-pole www.wago.com/733-368 Color: L = (Polzahl + 1) x Rastermaß Item description Horizontal or vertical PCB mounting via straight or angled solder pins 100% protected against mismating; only mating halves with the same number of poles can be connected together 10.05.
PAGE 2
Data sheet | Item number: 733-368 www.wago.com/733-368 Horizontal or vertical PCB mounting via straight or angled solder pins 100% protected against mismating; only mating halves with the same number of poles can be connected together Coding via coding fingers Safety information 1: The MULTI CONNECTION SYSTEM (MCS) is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS Connectors shall not be connected/disconnected when live or under load.
PAGE 3
Data sheet | Item number: 733-368 www.wago.com/733-368 Solder pin length 3.7 mm Solder pin dimensions 0.8 x 0.8 mm Drilled hole diameter (tolerance) 1.1(- … +0.
PAGE 4
Data sheet | Item number: 733-368 www.wago.com/733-368 CCA DEKRA Certification B.V. IEC 61984 NL-31141 CSA DEKRA Certification B.V. C22.2 1465035 CSA DEKRA Certification B.V. C22.