Cut Sheet

750-1405/040-000
5
407
5
16-Channel Digital Input Module 24 VDC
for eXTReme environmental conditions; high-side switching
1
12
34
56
7
8
910
11 12
13 14
15 16
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
750-1405/
040-000
13
14
Status
DI 1 ... DI 16
Data contacts
Push-in CAGE CLAMP
®
connection
DI 1 … DI 16
Power jumper contacts
1
750-1405/
040-000
10nF
10nF
10nF
3
5
7
9
11
13
15
10
8
6
4
2
12
14
16
DI 1
DI 3
DI 5
DI 7
DI 9
DI 11
DI 13
DI 15
0 V
+ 24 V
DI 2
DI 4
DI 6
DI 8
DI 10
DI 12
DI 14
DI 16
DI
0 V
+ 24 V
DI
This digital input module provides 16 channels at a width of just 12 mm.
It receives binary control signals from digital field devices (e.g., sensors,
encoders, switches or proximity switches).
The module features Push-in CAGE CLAMP
®
connections providing push-in
termination of solid conductors.
Each input channel has a noise-rejection RC filter with 3.0 ms time constant.
A green LED indicates the switched status of each channel.
Field and system levels are electrically isolated.
The module is ideally suited for operation in harsh environmental
conditions:
- extended temperature range
- higher dielectric strength and EMC resistance
- higher vibration and shock resistance
Description
Item No.
Pack.
Unit
16DI 24VDC 3.0ms /XTR 750-1405/040-000 1
Accessories
Item No.
Pack.
Unit
Miniature WSB Quick marking system
plain 248-501 5
with marking see Section 11
Operating tool, with partially insulated
shaft, type 1, blade (2.5 x 0.4) mm
210-719 50
Approvals
Conformity marking 1
Korea Certification
Marine applications GL
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
Technical Data
Wire connection Push-in CAGE CLAMP
®
Cross sections 0.25 mm² ... 1.5 mm² / AWG 24 ... 16
Strip lengths 8 ... 9 mm / 0.33 in
Dimensions (mm) W x H x L 12 x 62 x 100
Height from upper-edge of DIN 35 rail
Weight 60 g
Operating temperature -40 °C ... +70 °C
Storage temperature -40 °C ... +85 °C
Relative humidity Max. 95 % short-term condensation per
Class 3K7/IEC EN 60721-3-3 and E DIN
40046-721-3 (except wind-driven
precipitation, water and ice formation)
Operating altitude
without temperature derating: 0 m ... 2000 m;
with temperature derating: 2000 m ... 5000 m
(0.5 K/100 m); max.: 5000 m
Technical Data
Number of inputs 16
Input type Type 1 (IEC 61131-2), high-side switching
Signal voltage (0) -3 V ... +5 VDC
Signal voltage (1) 15 V ... 30 VDC
Input current (typ.) +0.6 mA (at 5 VDC)
+2.1 mA ... +2.4 mA (at 24 VDC)
Input filter 3.0 ms
Delay time "0" > "1" 3 ms
Delay time "1" > "0" 4 ms
Current consumption (internal) 25 mA
Voltage via power jumper contacts 24 VDC
under laboratory conditions +15 °C ... +35 °C 18 V ... 31.2 V (17.4 V ... 31.2 V)
1)
for -40 °C ... +55 °C 18 V ... 28.8 V (17.4 V ... 28.8 V)
1)
for +55 °C ... +70 °C 18 V ... 26.4 V (17.4 V ... 26.4 V)
1)
1)
including residual ripple of 15 %
Current via power jumper contacts (max.) 10 A
Rated surge voltage 1 kV
Bit width 16 bits
Vibration resistance acc. to IEC 60068-2-6 (acceleration: 5g),
EN 60870-2-2, IEC 60721-3-1, -3,
EN 50155, EN 61373
Shock resistance acc. to IEC 60068-2-27 (15g/11 ms/half-
sine/1000 shocks; 25g/6 ms/1000
shocks), EN 50155, EN 61373
EMC immunity of interference acc. to EN 61000-6-1, -2, EN 61131-2,
marine applications, EN 50121-3-2, -4, -5,
EN 60255-26, EN 60870-2-1,
EN 61850-3, IEC 61000-6-5, IEEE 1613,
VDEW: 1994
EMC emission of interference acc. to EN 61000-6-3, -4, EN 61131-2,
EN 60255-26, marine applications,
EN 60870-2-1, EN 61850-3,
EN 50121-3-2, -4, -5
750-1405/040-000
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 09.06.2016
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com