Datasheet

750-1415, 750-1416
1
175
1.3
8-Channel Digital Input Module 24 V DC
High-side switching, 2-conductor connection
1
2
3
4
5
6
7
8
750-1415
13
14
24 V
Status
DI 1 ... DI 8
CAGE CLAMP
®
S
connection
DI 1 … DI 8
Data contacts
Power jumper contacts
1
2
3
4
5
6
7
8
13
12
11
10
9
14
15
16
750-1415
DI 1
DI 2
DI 3
DI 4
DI 5
DI 6
DI 7
DI 8
0 V
+ 24 V
24 V
24 V
24 V
24 V
24 V
24 V
24 V
24 V
DI
10nF
10nF
0 V
+ 24 V
DI
The digital input module provides 8 channels in 2-wire connection at a width of
just 12mm (0.47in).
It receives binary control signals from digital field devices (e.g., sensors,
encoders, switches or proximity switches).
CAGE CLAMP
®
S terminations provide direct insertion of solid conductors.
Each input channel has a noise-rejection RC filter with a 3.0/0.2ms time cons-
tant.
A green LED indicates the switched status of each channel.
An optocoupler provides electrical isolation between the bus and the field side.
210-719 operating tool (2.5mm blade) is required to open the
CAGE CLAMP
®
S.
Description
Item No.
Pack.
Unit
8DI 24V DC 3.0ms, 2-conductor 750-1415 1
8DI 24V DC 0.2ms, 2-conductor 750-1416 1
Accessories
Item No.
Pack.
Unit
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Operating tool, with partially insulated shaft,
Type 1, blade (2.5 x 0.4) mm 210-719 1
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding ABS, DNV, GL, KR
r UL 508
Technical Data
Number of inputs 8
Current consumption (internal) 6 mA
Current consumption typ. (field side) 2 mA
Voltage via power jumper contacts 24 V DC (-25 % ... +30 %)
Signal voltage (0) -3 V ... +5 V DC (Type 1/3)
Signal voltage (1) +11 V ... +30 V DC (Type 3)
Input filter 3.0 ms (750-1415)
0.2 ms (750-1416)
Input current (typ.) +1.6 mA (at -3 V ... +5 V DC)
+4.3 mA ... +4.6 mA (at +11 V ... +32 V)
Isolation 500 V system/field
Wire connection CAGE CLAMP
®
S
Cross sections solid: 0.08 mm² ... 1.5 mm² /
AWG 28 ... 16
fine-stranded: 0.25 mm² ... 1.5 mm² /
AWG 22 ... 16
Stripped lengths 8 ... 9 mm / 0.33 in
Width 12 mm
Weight 45 g
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com