Data Sheet
Data sheet | Item number:750-466
www.wago.com/750-466
04.02.2019Page /2 10
Item description
The analog input module powers the transducers, receives transmitted analog signals, and with electrical isolation, transmits the signals to the
fieldbus.
The 24V supply for the field is derived from the module's power jumper contacts.
The shield (screen) is directly connected to the DIN rail.
This input module can supply the voltage for 2-wire transducers.
Data
Technical Data
Number of analog inputs 2
Total number of channels (module) 2
Type of signal Current
Type of signal current DC 4 … 20 mA
Sensor connection 2 x (2-conductor, 3-conductor)
Input voltage (max.) 10V
Signal characteristic Single-ended
Resolution [bit] 12 Bit