Cut Sheet
Data sheet | Item number:750-555
www.wago.com/750-555
08.11.2018Page /2 11
Item description
The analog output module generates signals of a standard magnitude 4–20mA.
The output signal is electrically isolated and transmitted with a resolution of 12 bits.
Power is derived from the field side.
The output channels of the module have a common ground potential.
Data
Technical Data
Number of analog outputs 4
Total number of channels (module) 4
Type of signal Current
Type of signal current DC 4 … 20 mA
Actuator connection 4 x (2-conductor)
Resolution [bit] 12 Bit
Bit width 4 x 16-bit data; 4 x 8-bit control/status (optional)
Load impedance either 0 ... 300 Ω or 300 ... 600 Ω (use same range of impedance for
all loads!)