Datasheet

750-657
1
285
1.7
4-Channel IO-Link Master
Delivered without miniature WSB markers
750-657
13
14
1
9
2
10
3
11
4
12
5
13
6
14
7
15
8
16
Data contacts
Status
Power jumper contacts
L1+
+24 V
0 V
C/Q1
L1-
L2+
C/Q2
L2-
L3+
+24 V
L3-
L4+
C/Q4
L4-
0 V
C/Q3
19
210
311
412
513
614
715
816
750-657
22 nF
1 nF
22 nF
0 V
+ 24 V
Status
Logic Logic
SPISPI
L-, 0 V
L+, 24 V
C/Q
C/Q1
C/Q2
C/Q3
C/Q4
Increasingly complex products, manufacturing flexibility and high demands on
quality assurance require intelligent, configurable and programmable sensors.
IO-Link streamlines required, varying interfaces for connecting to a control
system and tooling to fulfill these demands. A 3-wire connection can
communicate process data (as single bits, bytes and data blocks for input and
output data). It also communicates acyclic data (for identification,
configuration, parameterization and diagnostics) with up to 230.4 kbaud to
both sensors and actuators.
The functions and performance data are defined in device description files for
master and device; these are easy to customize via WAGO-I/O-CHECK. If a
device must be replaced, the configuration and parameterization can be
automatically restored without maintenance personnel. Project design,
installation and operation are simplified!
Description
Item No.
Pack.
Unit
4-Channel IO-Link Master 750-657 1
Accessories
Item No.
Pack.
Unit
WAGO-I/O-CHECK 759-302 1
GSD files Download: www.wago.com
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Conformity marking 1
r UL 508
Technical Data
Number of IO-Link ports 4
Voltage supply 5 V system voltage via internal data bus,
24 V via power jumper contacts
Voltage via power jumper contacts 24 V DC
(20.4 V ... 28.8 V; -15% ... +20%)
Current consumption typ. (24 V) 50 mA
Current consumption typ. (KBUS) 40 mA
Connection type Physics 2 (3-wire)
Transmission modes 4.8 kbaud (COM 1),
28.4 kbaud (COM 2),
230.4 kbaud (COM 3)
Line length (max.) 20 m
Internal bit width 4-24 bytes, configurable
Wire connection CAGE CLAMP
®
S
Cross sections 0.08 mm² solid / 0.25 mm²
fine-stranded ... 1.5 mm² /
AWG 28 /22 ... 14
Stripped lengths 8 ... 9 mm / 0.33 in
Width 12 mm
Weight 55 g
EMC 1-Immunity to interference acc. to EN 61000-6-1 (2007),
EN 61000-6-2 (2005)
EMC 1-Emission of interference acc. to EN 61000-6-3 (01.2007),
EN 61000-6-4 (2007)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com