Datasheet

750-880
1
52
PLC - ETHERNET Programmable Fieldbus Controller
32-bit CPU, multitasking
X1
1
8
ON
0: WBM
255: DHCP
X2
I/O
NS
MS
LINK
ACT
1
LINK
ACT
2
ETHERNET
W
750-880
USR
SD
12345678
ON
24V 0V
++
—
—
01 02
C
D
B
A
0 V
Fieldbus
connection
RJ-45
Address
Fieldbus
connection
RJ-45
Power jumper contacts
Configuration and
programming interface
(with cover open)
Data contacts
Marking area
Supply via
power jumper contacts
24 V
Supply
24 V
0 V
Status
voltage supply
-System
-Power jumper contacts
In conjunction with the WAGO-I/O-SYSTEM, the ETHERNET PLC is used as a
programmable controller within ETHERNET networks.
The PLC supports all digital, analog and specialty modules found within the
750/753 Series, and is suitable for data rates of 10/100 Mbit/s.
Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in
a line topology. This eliminates additional network devices, such as switches or hubs.
Both interfaces support Auto-Negotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and may be used for IP
address assignment.
The PLC supports both MODBUS/TCP and ETHERNET/IP for use in industrial
environments. It also supports a wide variety of standard ETHERNET protocols for
easy integration into IT environments (e.g., HTTP, BootP, DHCP, DNS, SNTP, SNMP,
FTP).
For usage in telecontrol applications the communication protocols
IEC 60870-5-101/-104, IEC 61850-7 and IEC 61400-25 are supported from the
plc's 750-880/025-001 and -002.
An integrated Web server provides the user with configuration options and status
information from the controller.
The IEC 61131-3 programmable controller is multitasking-capable and features a
battery-backed RTC.
1 Mbyte of data memory is available.
The 750-880 PLC has a slot for a removable memory card, allowing device
parameters or files (e.g., boot files) to be transferred from one controller to another.
The memory card can be accessed via FTP and be used as an additional drive.
Description
Item No.
Pack.
Unit
ETHERNET Controller 750-880 1
ETHERNET-Controller/T 750-880/025-000 1
Extended operating temperature range: -20 °C ... +60 °C
ETHERNET Controller Telecontrol/T 750-880/025-001 1
Extended operating temperature range: -20 °C ... +60 °C
ETHERNET Controller Telecontrol ECO/T 750-880/025-002 1
Extended operating temperature range: -20 °C ... +60 °C
Accessories
Item No.
Pack.
Unit
SD memory card, 1 GB 758-879/000-001 1
WAGO-I/O-PRO V2.3, RS-232 kit 759-333 1
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding (versions upon request) ABS, DNV, GL, KR
r UL 508
System Data
No. of controllers connected to Master limited by ETHERNET specification
Transmission medium Twisted Pair S-UTP
100 Ω, Cat 5;
Max. line length: 100 m
Baud rate 10/100 Mbit/s
Transmission performance Class D acc. to EN 50173
Buscoupler connection 2 x RJ-45
Protocols EtherNet/IP, MODBUS/TCP (UDP), HTTP,
BootP, DHCP, DNS, SNTP, FTP, SNMP
750-880/025-001 and -002 IEC 60870-5-101/-104, IEC 61850-7,
IEC 61400-25
Programming WAGO-I/O-PRO V2.3
IEC 61131-3 IL, LD, FBD, ST, FC
SD card slot Push-push mechanism,
sealable cover lid
Type of memory card SD and SDHC up to 32 Gbytes (All
guaranteed properties are only valid in
combination with the WAGO
758-879/000-001 memory card.)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 25.06.2013
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Tel.: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com