Datasheet

Data sheet | Item number:750-891
www.wago.com/750-891
Subject to changes.
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: [phone] | Fax: [phone]
Email: [e-mail] | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at [phone].
05.12.2019Page /2 11
Item description
WAGO’s Modbus TCP Controller can be used as a programmable controller within ETHERNET networks in conjunction with the WAGO-I/O-SYSTEM.
The controller detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of
analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules.
Two ETHERNET interfaces and an integrated switch allow the fieldbus to be wired in a line topology. This eliminates additional network devices, such
as switches or hubs. Both interfaces support autonegotiation and Auto-MDI(X).
The DIP switch configures the last byte of the IP address and may be used for IP address assignment.
The controller is designed for fieldbus communication in Modbus® networks. It also supports a wide variety of standard ETHERNET protocols (HTTP,
HTTPS, BootP, DHCP, DNS, SNTP, SNMP, SFTP).
An integrated Webserver provides user configuration options, while displaying PLC status information.
The IEC 61131-3 programmable controller is multitasking-capable and features a capacitor-backed RTC.