Datasheet

750-923
1
63
I/O-SYSTEM
WAGO USB Service Cable
The WAGO USB Service Cable connects a PC (notebook) to either the ser-
vice Interface of the 857 Series Signal Conditioners and Relay Modules
(JUMPFLEX) or to WAGO-I/O-SYSTEM buscouplers/controllers.
Notice:
Using the WAGO 759-923 USB Service Cable in combination with some of
the programmable fieldbus controllers requires a certain firmware version or
higher:
750-841 as from firmware version 12
750-872/0020-0000 as from firmware version 2
Description
Item no.
Pack.
unit
WAGO USB Service Cable 750-923 1
Technical Data
USB specification 2.0 compatible/full-speed device
Operating system Windows 98/2000/XP/VISTA
Operating temperature -25 °C ... +70 °C
Interface USB type A/m
Length 2.5 m
Connector dimensions (WxHxD) 15 x 50 x 19 mm
Test voltage 2.5 kV, 50 Hz, 1 min.
Conformity marking 1
Immunity to interference acc. to EN 61000-4-3,
EN 61000-4-6
Emission of interference acc. to EN 55022
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 01.04.2009
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com