Datasheet

750-963
591
10
10
CANopen Fieldbus Connector
L
H
GND
L
H
GND
120 Ω
1 2 3 4 5
6 7 8 9
w 750
16 mm
15 °
<_____________54 mm_________>
<
<_1 9 m __>
<_________45 m m ________>
<__36 mm / 1.42 in
<__5-6 mm / 0.22 in
__>
__>
__>
<__10 mm / 0.394 in
<_____37.2 mm_____>
<_22.9 mm>
5.4 mm>
< 5.8 mm >
<_____ 36 .7mm _____>
The fieldbus connector links a CANopen device to a CANopen line.
The fieldbus connector has the following features:
• 2 horizontal cable entries. One input and one output.
• Fast and maintenance-free CAGE CLAMP
®
connection, can be held in the
open position with the help of an actuation slide mechanism.
• Externally operable switch to activate and/or deactivate the network
terminating resistor.
For the first and last station on the bus, the switch must be set to “ON”
(terminating resistor activated). Switch setting to “OFF” for the intermediate
stations on the bus (terminating resistor deactivated).
Description
Item No.
Pack.
Unit
Bus connector with D-Sub female connector; 9
poles
750-963 1
Accessories
Item No.
Pack.
Unit
Operating tool, with partially insulated shaft, 210-719 1
Type 1, blade (2.5 x 0.4) mm
Operating tool, with partially insulated shaft, 210-720 1
Type 2, blade (3.5 x 0.5) mm
Operating tool for strain relief
Phillips screwdriver (PH 0)
Test pin, 1 mm / 0.039 in Test wire for soldering 735-500 1
Marking possibilities
Miniature WSB Quick marking system or WMB Multi marking system
Approvals
Shipbuilding see "Approvals Overview" in section 1
r UL 508
Technical Data
Double cable input min. Ø 4.5 mm/0.177 in / max. Ø 9.5
Data transmission rate corresponding to CANopen specification
10 kbaud ... 1 Mbaud
Fixing screw UNC- 2 A 4-40
Max. tightening torque 0.4 Nm
Housing material PA66-105-V2
Housing color light gray
Degree of protection IP20
Ambient operating temperature 0°C ... +60°C
Storage temperature -25 °C ... +85 °C
Relative air humidity (no condensation) 95 %
Wire connection CAGE CLAMP
®
terminal strip with locking
slide (218 Series)
Cross sections 0.08 mm² ... 0.5 mm² / AWG 28 ... 20
sep. connection 0.75 mm² / AWG 18
possible
Stripped length see graphic
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com