Data Sheet

Data sheet | Item number:759-370
WAGOframe; CD
www.wago.com/759-370
06.12.2018Page /1 2
Item description
WAGOframe is an FDT/DTM‐based software used for parameterization, commissioning and diagnostics of field devices.
DTM device drivers for the devices employed are required to use the WAGOframe FDT frame application.
The WAGOframe FDT frame application provides a wizard, which simplifies the operation of components, such as WAGO JUMPFLEX DTMs. For
example, this wizard guides the user through the different operating modes of DTM device drivers.
Depending on the PC communication interface used, an appropriate communication cable including DTM is required.
Data
System requirements
Supported operating systems Windows XP (SP3 or later)
Windows 7
Processor 1 GHz or higher, with 32 bits (x86) or 64 bits (x64)
RAM memory min. 1 GB RAM (recommended: 2 GB RAM or more)
Hard disk storage min. 300MByte
Graphics resolution min. 1024 x 786 (recommended: 1280 x 1024 or higher)
Other system requirements Free PC interface for communication with device (e.g., USB, serial,
ETHERNET, ...); Cable between PC communication interface and
device; DTM software for PC communication interface; Device DTM
software; CD-ROM and mouse required
Delivery
Delivery type Installation file (CD-ROM)
Included CD-ROM with software and documentation