User Manual

e!DISPLAY 7300T Commissioning 65
762-300X Web Panels
Manual
Version 1.1.0
Table 29: WBM Page “Display > Screensaver” – “Screensaver Settings” Group
Parameters
Explanation
Screensaver Settings
Specify if an image, the time, text or a backlight
should be displayed or if screen care should be
performed.
• Image: The screensaver is activated with the
WAGO logo after a time set under “Duration”.
• Text: Enter text here that is activated as the
screensaver after a time set under “Duration”.
• Time: The current time is displayed as the
screensaver.
• Backlight: The brightness is reduced to the
screensaver brightness and the WAGO logo
displayed. Set the required brightness reduction
under “Display > Brightness > Brightness
Screensaver”.
• Screen care: For screen care, all pixels are
inverted for a few milliseconds (not visible).
• Off: No screensaver is displayed.
Duration (sec.)
When the display is not used, the screensaver is
activated after the time set here has elapsed.
Text
Enter any text display as the text screensaver.
(Can be adjusted in the “Text” option.)
Time (hh:mm:ss)
Enter the time at which screen care should be
performed.
(Can be adjusted in the “Screen care” option.)
7.5.12 WBM Page “Display > Clean Display”
Display
►Clean Display
►Clean Display
►Time Duration (sec.)
You can adjust the settings for display cleaning on this page.
7.5.12.1 “Clean Display” Group
Set how long the display should be disabled for cleaning.
7.5.13 WBM Page “Display > Display Orientation”
Display
►Display Orientation
►Display Orientation
►Display Orientation
You can adjust the settings for display orientation on this page.
7.5.13.1 “Display Orientation” Group
Set if the display should appear in portrait or landscape mode. The options are
landscape, portrait, landscape rotated and portrait rotated.