User Manual

68 Commissioning e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
Table 33: WBM Page “Networking > TCP/IP” – “Default Gateway n” Group
Parameters
Explanation
Gateway enabled
Set here whether the selected default gateway is to
be used.
Disabled
The default gateway is not used.
Enabled
The default gateway is used.
Gateway Address
Enter the address of the default gateway here.
Gateway Metric
Set here a number as the metric. With multiple
default gateways, the metric defines the gateway to
which data packets are first sent. Priority is given to
the gateway with the lower metric. The default value
for the metric is 20.
The lowest value is 0.
The highest value is 4.294.967.295.
Click on [Submit] to apply a change. It is effective immediately.
7.5.15.3 "DNS Server" Group
Table 34: WBM Page “Networking > TCP/IP” – “DNS Server” Group
Parameters
Explanation
DNS Server n
The addresses of the defined DNS servers are
displayed here. If not server is entered, none is
displayed.
New Server IP
Add additional DNS addresses here.
Click on [Delete] to remove the selected DNS server. The change is effective
immediately.
Click on [Submit] to add the entered DNS server. The change is effective
immediately.
7.5.16 WBM Page “Networking > Ethernet”
Networking
►Ethernet
►Interface X1
►Enabled
►Autonegotiation On
►Speed / Duplex
►Interface X2
►Enabled
►Autonegotiation On
►Speed / Duplex
►Switch Configuration
►Port Mirror
►Fast Aging Enabled
►Broadcast Protection
►Rate Limit
The ETHERNET settings are located on the “Networking > Ethernet” page.