User Manual

80 Commissioning e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
Click on [Submit] to apply a change. It is effective immediately.
7.5.22 WBM Page “Administration > Users”
Administration
►Users
►Change Password for
Selected WBM User
►Select User
►New Password
►Confirm Password
The settings for user administration are shown on this page.
7.5.22.1 “Change Password for Selected WBM User” Group
Change passwords!
The initial passwords as delivered are documented in this manual and therefore
do not provide sufficient protection. Change the passwords to meet your
particular needs!
Table 54: WBM Page “Administration > Users” – “Change Password for selected user” Group
Parameters
Explanation
Select User
Select the user (“user” or “admin”) to whom you
want to assign a new password.
New Password
Enter the new password for the user selected under
“Select User”.
Permitted characters for the password are the
following ASCII characters: a … z, A … Z, 0 … 9,
blank spaces and the special characters:
! ? % + = ( ) _ # " - / ` < > * ; , : .
Confirm Password
Enter the new password again for confirmation.
Click on [Submit] to apply a change. It is effective immediately.
Only use permitted characters for WBM passwords!
If passwords with invalid characters are set for the WBM outside the WBM (e.g.,
from a USB keyboard), access to the WBM pages directly on the display is no
longer possible because only permitted characters are available from the virtual
keyboard.
Observe access rights!
The users in WBM exclusively have access to the Web pages. User
administration for controller applications is configured separately.