User Manual

84 Commissioning e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
last ...”, you are displaying the last n diagnostic notifications. You can also specify
the number “n”.
“Automatic refresh cycle (sec)” switches on cyclic refresh. The refresh cycle
continues as long as the “Diagnostic” page is open. If you exit the “Diagnostic”
function, the refresh stops until you call up the “Diagnostic” menu item again.
The notifications are displayed below the settings.
7.5.24.10 Setup Wizard
The setup wizard can be manually launched from the Setup Wizard menu item.
7.5.24.11 Software Upload
From the Software Upload menu item, you can install software packages on the
panel from your PC. Using the Browse button, simply navigate to the software
package on your PC and click [Submit] to confirm.
Another “Activate new Software” form then appears. You can now choose
between the “Activate” and “Discard” actions, see also table below. Press
[Submit] to confirm.
Parameter
Explanation
Software File
This shows the file name of the
transferred software package. If no
new uploaded software package is
present on the controller, the message
“No upload file exists” is displayed.
Action
Select here the action required.
Activate
The transferred software package is
activated.
Discard (delete upload)
The transferred software package is
deleted again from the controller.
The file with the software package is deleted again after the installation is
completed or when the controller is restarted.