User Manual

38 Function Description e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
4.4 Network
4.4.1
Interface Configuration
The X1 and X2 ETHERNET interfaces of the panel are connected to an internal
3-port switch, whose third port is connected to the CPU. The “Configuration Type”
is set to “DHCP” by default. The TCP/IP settings such as IP address or subnet
mask apply to both X1 and X2.
4.4.2 Network Security
4.4.2.1 Users and Passwords
There are several user groups in the panel that can be used for different
services.
A default password is set for all users. We strongly recommend changing these
passwords on startup!
4.4.2.2 Services and Users
All password-protected services and their associated users are listed in the
following table.
Service
WBM user
Linux
®
user
admin
user
root
admin
user
Web-Based Management (WBM)
X
X
Linux
®
console
X
X
X
Telnet
X
X
X
FTP
X
X
X
FTPS
X
X
X
SSH
X
X
X
4.4.2.3 WBM User Group
The Web-Based Management (WBM) has its own user management. The users
in this system are isolated from the other user groups in the system for security
reasons.
At initial start-up, you are prompted in the WBM to change the password when
logging in as an Admin user.
This does not change the passwords for the Linux® “root” and “admin” users!