User Manual

e!DISPLAY 7300T Commissioning 55
762-300X Web Panels
Manual
Version 1.1.0
7.5 Configuring in the Web-Based Management (WBM)
After switching on for the first time, the WBM user interface is displayed
automatically. If you want to change the configuration later during operation,
press the “CFG/RST” button or use the swipe gesture (see also section 8
“Running Web Visualization”).
In the WBM user interface, you configure the Web panel directly on the touch
screen.
Alternatively, you can also connect the Web panel to your PC via ETHERNET
and configure the Web panel from the PC. For this purpose, read the panel's IP
address in the WBM under “Information” > “Network Details X1/X2” and then
enter it as the address in the PC's Web browser.
7.5.1 WBM User Interface
The WBM user interface is divided into three areas:
1. Header
2. Navigation menu
3. Content area
Figure 11: WBM User Interface