User Manual

e!DISPLAY 7300T Commissioning 63

762-300X Web Panels

Manual

Version 1.1.0

7.5.8 WBM Page “Display > Touchscreen Calibration”

Display

►Touchscreen Calibration

►Calibrate

Display

This page shows settings options for the display calibration.

7.5.8.1 “Touchscreen Calibration” Group

Determine if the display should be calibrated or not when switching on the panel.

7.5.9 WBM Page “Display > Acoustic Signal”

Display

►Acoustic Signal

►Acoustic Touch Signal

►Acoustic Signal

You can enable panel beeps on this page.

7.5.9.1 “Acoustic Touch Signal” Group

Determine if an acoustic signal (beep) is output or not when touching the display.

If yes, the beep is emitted when the display is touched. However, no check is

made whether a button was also touched.

7.5.10 WBM Page “Display > Brightness”

Display

►Brightness

►Brightness Screensaver

►Brightness Control

►Day / Night Settings

►Starting Time Day

►Starting Time Night

►Brightness Night

►Brightness Night Screen-

saver

You can adjust the settings for display brightness on this page.

7.5.10.1 “Brightness” Group

Use the slider to adjust the default display brightness. You can test the

brightness before confirming the setting. Press [Test].

7.5.10.2 “Brightness Screensaver” Group

Use the slider to adjust the reduced brightness for the screensaver. You can test

the brightness before confirming the setting. Press [Test].