User Manual

e!DISPLAY 7300T Commissioning 67
762-300X Web Panels
Manual
Version 1.1.0
7.5.15 WBM Page “Networking > TCP/IP”
Networking
►TCP/IP
►IP Configuration
►Configuration Type
►IP Address
►Subnet Mask
►Default Gateway n
►Gateway enabled
►Gateway Address
►Gateway Metric
►DNS Server
►Configured: None/
DNS Server n
►New Server IP
►Additionally used
(assigned by DHCP)
The TCP/IP settings for the ETHERNET interfaces are located on the
“Networking > TCP/IP” page.
7.5.15.1 “IP Configuration” Group
Table 32: WBM Page “Networking > TCP/IP” – “IP Configuration” Group
Parameters
Explanation
Configuration Type
Select a static or dynamic IP address.
Static IP
Static IP addressing
DHCP
Dynamic IP addressing
BootP
Dynamic IP addressing
IP Address
Enter here a static IP address. This is active if
“Static IP” is activated in the Configuration Type
field.
Subnet Mask
Enter the subnet mask here. This is active if “Static
IP” is activated in the Configuration Type field.
Click on [Submit] to apply a change. It is effective immediately.
7.5.15.2 “Default Gateway n” Groups
You can configure two default gateways here. The panel sends all network data
that does not go to a subscriber in the local network to a default gateway. First,
the gateway with the lowest metric is addressed. If it is accessible, the second
gateway is used. The selection is random if the metric is the same.
A default gateway can also be configured via DHCP. These default gateways are
given the metric 10, by which they are normally used before the static gateways.