User Manual

72 Commissioning e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
7.5.17.2 “Firewall Parameter Interface X1/X2” Group
The settings in this group are based on the firewall configuration on the IP level.
Table 38: WBM Page “Firewall > General Configuration” – “Firewall Parameter Interface X1/X2”
Group
Parameters
Explanation
Firewall Enabled
Enable or disable the firewall for the relevant
interface.
ICMP Echo Protection
Enable or disable the “ICMP echo broadcast”
protection for the relevant interface.
ICMP Echo Burst Limit per
second
You can specify the maximum number of “ICMP
echo bursts” per second.
Click on [Submit] to apply a change. It is effective immediately.
7.5.17.3 “Firewall Services Interface X1/X2” Group
The settings in this group are based on the firewall configuration on the IP level.
Table 39: WBM Page “Firewall > General Configuration” – “Firewall Services Interface X1/X2”
Group
Parameters
Explanation
Telnet
Enable or disable the firewall for the respective
service.
The services themselves must be enabled or
disabled separately on the “Ports and Services”
page.
FTP
FTPS
HTTP
HTTPS
SSH
Click on [Submit] to apply a change. It is effective immediately.