User Manual

74 Commissioning e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
7.5.18.1 “MAC Address Filter State” Group
Table 40: WBM Page “Firewall > MAC Address Filter” – “MAC Address Filter State” Group
Parameters
Explanation
Current State
Enable or disable the global MAC address filter
here.
Click on [Submit] to apply a change. It is effective immediately.
7.5.18.2 “MAC Address Filter State X1/X2” Group
Table 41: WBM Page “Firewall > MAC Address Filter” – “MAC Address Filter State X1/X2” Group
Parameters
Explanation
Current State
Enable or disable here the MAC address filter for the
specific interface.
Click on [Submit] to apply a change. It is effective immediately.
7.5.18.3 “MAC Address Filter Whitelist” Group
Table 42: WBM Page “Firewall > MAC Address Filter” – “MAC Address Filter Whitelist” Group
Parameters
Explanation
Filter Enabled
Enable or disable the filter for the relevant list entry
here.
MAC Address
Displays the MAC address of the relevant list entry.
MAC Mask
Displays the MAC mask of the relevant list entry.
Click on [Submit] to apply a change. It is effective immediately.
Click on the appropriate [Delete] button to remove an existing list entry. The
change is effective immediately.
7.5.18.4 “Add New MAC Address Filter” Group
Add a new entry to the whitelist from this form.
Table 43: WBM Page “Firewall > MAC Address Filter” – “Add New MAC Address Filter” Group
Parameters
Explanation
Filter Enabled
Enable or disable the filter for the new list entry
here.
MAC Address
Enter here the MAC address for a new list entry.
You can enter 10 filters.
MAC Mask
Enter the MAC mask for the new list entry here. You
can enter 10 filters.
Click on [Submit] to apply the new list entry. The change is effective
immediately. You can enter 10 filters.