User Manual

76 Commissioning e!DISPLAY 7300T
762-300X Web Panels
Manual
Version 1.1.0
7.5.19.2 “User Filter n” Group
Table 45: WBM Page “Firewall > User Filter” – “User Filter n” Group
Parameters
Explanation
Source IP Address
Displays the source IP address used for the
corresponding filter entry.
Source Netmask
This displays the source network for the
corresponding filter entry.
Source Port
This displays the source port number for the
corresponding filter entry.
Destination IP Address
Displays the destination IP address currently used
for the filter entry.
Destination Subnet Mask
Displays the destination network mask for the
currently used filter entry.
Destination Port
Displays the destination port number for the
currently used filter entry.
Protocol
Displays the permitted protocols for the currently
used filter.
Input Interface
Displays the permitted interfaces for the respective
filter.
Click on the appropriate [Delete] button to remove a configured filter. The
change is effective immediately.
7.5.19.3 “Add New User Filter” Group
You only have to enter values in the fields that are to be set for the filter. At least
one value must be entered; all other fields can remain empty.