User Manual

e!DISPLAY 7300T Commissioning 83
762-300X Web Panels
Manual
Version 1.1.0
7.5.24 WBM Function Menu
The function menu provides quick access to frequently used functions. The
functions are described below.
7.5.24.1 Reboot
Reboot restarts the panel.
7.5.24.2 PLC Selection List
PLC Selection List exits the WBM and takes you to the “PLC Selection List”
from where you can start a Web visualization.
7.5.24.3 Start Clean Display
The Start Clean Display menu item starts the function described in section
“Performing Service” > “Cleaning the Touch Screen”.
7.5.24.4 Start Screensaver
The Start Screensaver function can be used to manual start the screensaver.
This function is only available on the local WBM.
7.5.24.5 Font Upload
From the Font Upload menu item, you can install True Type fonts on the panel.
In addition, True Type fonts manually installed by the user are displayed. See
also section “Function Description” > “Font Upload”.
7.5.24.6 Backup
The Backup menu item allows you to create a backup as described in “Function
Description > Memory Card Functions > Backup”. If called up in the local WBM,
only the removable storage device can be used as the destination medium.
7.5.24.7 Restore
The Restore menu item allows you to install a backup as described in “Function
Description > Memory Card Functions > Restore”. If called up in the local WBM,
only the removable storage device can be used as the source medium.
7.5.24.8 Create Image
The Create Image menu item allows you to copy a complete system from or to
the SD card.
7.5.24.9 Diagnostic
The Diagnostic menu item displays the diagnostic messages. By selecting “All
notifications”, you are displaying all notifications and by selecting “Read only the