User Manual

40 Commissioning WAGO PERSPECTO® 762
762-3150/000-003 CP 150 XGA TV CAN
Manual
Version 1.0.2
6.3.8 “Backup/Restore” Tab
You can save and restore the device configuration and project data, for example,
on a memory card.
Doing so allows you to restore the data to the new device when replacing a
defective device without having to redo all the settings.
What data and files should be saved is defined by the backup_restore.cfg file.
The file is stored on the device via the path \Flashdisk\SysExtras\Tools\
backup_restore.cfg
The file is divided into three sections.
[REGISTRY]
"\Memory Stick\wago\backup\registry.reg"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BackLight];MaxIntensity
The section devices the registry entries to be saved. The path indicates where
the registry entries shall be saved.
The registry entries to be saved are listed there.
[SRAM]
;Destination path; filename or automatically sram.bin
"\Memory Stick\wago\backup\sram"
The path indicates where the SRAM content shall be saved.
[FILES]
default.*;"\FlashDisk\PLCWinCE\";"\Memory Stick\wago\backup\FlashDisk\
ElaDesign\"
The section devices the files on the device to be saved.
• default.*; specified the file that should be saved. Wildcards such as *.*
and.* are permitted.
• "\FlashDisk\PLCWinCE\"; defines the path of the file to be saved.
• "\Memory Stick\wago\backup\FlashDisk\PLCWinCE\" defines the path
where the file should be saved.