User Manual

Touch Panel Standard Line Commissioning 125
762-4xxx TP 600
Manual
Version 1.3.0
8.6.1.24.4 “HTTP” Group
Table 91: WBM “Configuration of Network Services” Page – “HTTP” Group
Parameter
Explanation
Service active
Enable/disable the HTTP service here.
Click the [Submit] button to apply the changes. The change takes effect
immediately.
Disconnection abort on disabling
If the HTTP service is disabled, the connection to the controller may be
interrupted. Then open the WBM page again.
8.6.1.24.5 “HTTPS” Group
Table 92: WBM “Configuration of Network Services” Page – “HTTPS” Group
Parameter
Explanation
Service active
Enable/disable the HTTPS service here.
Click the [Submit] button to apply the changes. The change takes effect
immediately.
Disconnection abort on disabling
If the HTTPS service is disabled, the connection to the controller may be
interrupted. Then open the WBM page again.
8.6.1.24.6 “WAGO-I/O-CHECK” Group
Table 93: WBM “Configuration of Network Services” Page – “I/O-CHECK“ Group
Parameter
Explanation
Service active
Enable/disable the WAGO-I/O-CHECK service here.
Click the [Submit] button to apply the changes. The change takes effect
immediately.