User Manual

18 Regulations Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
1.8 Legal Bases
1.8.1 Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications. WAGO Kontakttechnik GmbH & Co. KG owns all
rights arising from the granting of patents or from the legal protection of utility
patents. Third-party products are always mentioned without any reference to
patent rights. Thus, the existence of such rights cannot be excluded.
1.8.2 Personnel Qualification
All sequences implemented on Series 762 devices may only be carried out by
electrical specialists with sufficient knowledge in automation technology. These
specialists must be familiar with the current standards and guidelines for the
devices and the automated environments.
All changes to the controller shall always be performed by qualified personnel
with sufficient skills in PLC programming.
1.8.3 Intended Use
WAGO Touch Panels are suitable for use in the area of control and automation.
Their use extends beyond residential and commercial areas, as well as industrial
areas. Technical data must be observed for all types of applications.
1.8.3.1 Improper Use
• Non-observance of the intended use
• Use of the products in areas with special risk that require flawless
continuous operation and in which failure or operation of the product can
result in an imminent risk to life, limb or health or cause serious damage to
property or the environment (such as the operation of nuclear power plants,
weapon systems , aircraft and motor vehicles)
1.8.4 Technical Condition of Specified Devices
The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO
Kontakttechnik GmbH & Co. KG:
• Repairs,
• Changes to the hardware or software that are not described in the
operating instructions,
• Improper use of the components.