User Manual

40 Properties Touch Panel Standard Line
762-4xxx TP 600
Manual
Version 1.3.0
4.4.9 “X8” – Line-out Audio Output (Headphones)
(Only with PIO2 and PIO3 Hardware)
The audio output is a three-pole, 3.5 mm stereo socket. Headphones or a
compatible audio device can be connected to this socket, e.g. in order to output
acoustic warning signals or voice messages that the control application contains.
4.4.10 “X11” – Four Digital Inputs and Outputs DIO
(Only with PIO3 Hardware)
There are four digital connectors, configurable as inputs or outputs, for
connecting actuators and sensors.
A 10-pole picoMAX
®
plug is used with 10 push-in CAGE CLAMP®S connections
(female connector 2091-1110).
Table 14: X11 Pin Assignment
CAGE CLAMP
®
Name
Assignment
1
GND
Reference potential 0 V (ground)
2
DIO 0
Digital I/O 0
3
GND
Reference potential 0 V (ground)
4
DIO 1
Digital I/O 1
5
GND
Reference potential 0 V (ground)
6
DIO 2
Digital I/O 2
7
GND
Reference potential 0 V (ground)
8
DIO 3
Digital I/O 3
9
GND
Reference potential 0 V (ground)
10
24VDC
Supply voltage for digital inputs and outputs
The digital inputs/outputs are electrically isolated from the supply voltage of the
panel and from the other interfaces.