User Manual

Touch Panel Standard Line Functions 61
762-4xxx TP 600
Manual
Version 1.3.0
5.4 Web Browser
The integrated Web browser displays the controller websites.
Up to 10 controllers can be configured in the WBM. The “PLC List”/”Browser
Favorites” is used to select a controller and to launch his Web visualization
directly.
The Web browser can display Web pages via encrypted connections (HTTPS).
The virtual keyboard opens automatically when an input field is actuated. The
user can use the “Switch keyboard” button to switch between levels (letters and
numbers).
The user can choose between the “virtual keyboard” and “CODESYS numpad
and keypad” in a CODESYS visualization.
The following can be configured as the start page:
• the WBM
• the selection list “PLC List”/”Browser Favorites”
• the Web visualization of a specific controller directly.
See “Favorites” Page in the new WBM for the configuration of the start page.
5.5 Connection Monitoring
If a CODESYS visualization connection is interrupted, an error message is
displayed and the panel automatically attempts to restore the connection
(reconnect) every 10 seconds.
5.6 WBM for Configuration/Parameterization
The Web-Based Management (WBM) provides an interface for configuring or
parameterizing the panel optimized for the touch-sensitive screen. The WBM can
be called up from the panel directly or on the engineering PC.
A detailed description of all available elements and functions is available in
Section “Commissioning”.
5.7 Network
5.7.1 Interface Configuration
The X1 and X2 ETHERNET interfaces of the panel are connected to an internal
3-port switch, whose third port is connected to the CPU. The “Configuration Type”
is set to “DHCP” by default. The TCP/IP settings such as IP address or subnet